How to install Django on a Hostgator shared hosting

Thanks to that help full document that I found on a Forum (I can’t )

Here is a step by step tutorial to install Django framework on your shared hosting. But first of all it is important to be aware that the performance is not the best on a shared Hosting. This solution is a good one for a small scaled solutions, on for a website that doesn’t have a lot of visitors. Otherwise it is better to purchase a dedicated server for a better performance and experience for your application users. Also you are limited in term of Python Modules the Hostgator list above show what you have access to ( according to this forum post :


1- First of all you need to enable your access via SSH to your server. The best way to do this (and the only way I found) is by contacting via the chat ( or phone the customer service.

2 – Once you access is enabled connect to your server via SSH (Windows users can access trough Putty)

For Linux / Mac users type the following command in the Terminal:

ssh -p 2222

For Windows Putty users :

Hotsname / Server IP : / or the server IP (you can find this information on your Cpanel on the right sidebar in the general information section)

Username and Password : Use your Cpanel Credentials

Port : 2222 (for shared hosting otherwise it’s 22 for dedicated servers according to Hostgator help page

The following steps are from the source document linked above :


(this probably out of date…)

How to install Django on a basic shared hosting plan with plain CGI

I’ve successfully installed Django on my Hostgator account (‘Baby Croc’ plan) using these steps. Hostgator has been really great for me, but they don’t support fastCGI. Using vanilla CGI with Django is not generally recommended and results in crappy performance, but for a low traffic site it’s bearable (barely).


Here are some links to source material for this document:




SSH shell access to your account

Python 2.3+ (Python 2.4 preferred)

MySQLdb module (ask your support person to install this)

Some knowledge of Django and Python


Install django and create a project directory


Create a directory in your home directory called “django” (or whatever) that is outside of your document root.


mkdir ~/django

cd ~/django

svn co


Create a directory for your Django projects.


mkdir ~/django/projects


You should now have the following folders:





Edit your .bash_profile and add the following:


export PATH=”.:/home/username/django/django/bin:$PATH”

export PYTHONPATH=/home/username/django

Then enable the changes:

source .bash_profile


Add the following script to your cgi-bin directory and name it




import os, sys


sys.path.insert(0, “/home/username/django/”)

sys.path.insert(0, “/home/username/django/projects”)

sys.path.insert(0, “/home/username/django/projects/newprojects”)


import django.core.handlers.wsgi


os.chdir(“/home/username/django/projects/newproject”)    # optional

os.environ[‘DJANGO_SETTINGS_MODULE’] = “newproject.settings”


def runcgi():

    environ                      = dict(os.environ.items())

    environ[‘wsgi.input’]        = sys.stdin

    environ[‘wsgi.errors’]       = sys.stderr

    environ[‘wsgi.version’]      = (1,0)

    environ[‘wsgi.multithread’]  = False

    environ[‘wsgi.multiprocess’] = True

    environ[‘wsgi.run_once’]     = True


    application = django.core.handlers.wsgi.WSGIHandler()


    if environ.get(‘HTTPS’,’off’) in (‘on’,’1′):

        environ[‘wsgi.url_scheme’] = ‘https’


        environ[‘wsgi.url_scheme’] = ‘http’


    headers_set  = []

    headers_sent = []


    def write(data):

        if not headers_set:

             raise AssertionError(“write() before start_response()”)


        elif not headers_sent:

             # Before the first output, send the stored headers

             status, response_headers = headers_sent[:] = headers_set

             sys.stdout.write(‘Status: %s\r\n’ % status)

             for header in response_headers:

                 sys.stdout.write(‘%s: %s\r\n’ % header)






    def start_response(status,response_headers,exc_info=None):

        if exc_info:


                if headers_sent:

                    # Re-raise original exception if headers sent

                    raise exc_info[0], exc_info[1], exc_info[2]


                exc_info = None     # avoid dangling circular ref

        elif headers_set:

            raise AssertionError(“Headers already set!”)


        headers_set[:] = [status,response_headers]

        return write


    result = application(environ, start_response)


        for data in result:

            if data:    # don’t send headers until body appears


        if not headers_sent:

            write(”)   # send headers now if body was empty


        if hasattr(result,’close’):





Edit your root .htaccess file and add the following lines


RewriteEngine on

RewriteRule ^media – [L]

RewriteRule ^cgi-bin – [L]

RewriteCond %{REQUEST_FILENAME} !-f

RewriteRule ^(.*)$ /cgi-bin/$1 [QSA,L]


Create a new django project


(or upload your existing project)

It might be a good idea to create a new dummy project just to have a baseline to test your installation.


cd ~/django/projects startproject newproject

cd newproject startapp newapp


Try it out


Since DEBUG is True by default (in you should get the default Django 404 page.

Make sure you set DEBUG=False before you open your site to the public.




The admin media files reside in django/contrib/admin/media and since they aren’t accessible from your document root you need to create a symbolic link to the media files (or just copy them):


ln -s ~/django/django/contrib/admin/media ~/www/media


Where “~/www/” is your document root.

How to download a video from a protected website

You often want to save a video on your hard drive to be able to watch later on a travel when you don’t have access to internet. There is one way to do it on websites that uses HTTP Live Streaming HLS.

Update :

Quick method :

An easier method is to use directly the m3u8 file available by filtering “m3u8” in the developer Filter box.

Replace the m3u8 url in the following ffmpeg command :

ffmpeg -i "url" -c copy -bsf:a aac_adtstoasc 11.mp4

Source :

Long method :

Let’s take for example an episode of “LES RECETTES POMPETTES” when using the developper option (F12) on the Network section we can quickly see that small 10 seconds transport stream video files are received from the streaming server


If we analyse the link we see the extension .ts, that is the 10 seconds transport stream. The file name ends with 4 that’s the 4th 10 second transport stream.


If we look at the video duration on the website we see that it lasts 21 min we can than calculate the number of files to download 24*60/10 = 144 files.

With a small bash file we can loop trough the list of files and download them :


#Download transport stream files from server




for i in `seq 1 $max` do wget "$server$i$extension" done


Last step and not the least is to concatenate all the files to output them into a single transport stream of 21 minutes. For that task we can use ffmpeg concatenate function (you can get ffmepg by using sudo apt-get ffmpeg command ) :

ffmpeg -f concat -safe 0 -i mylist.txt -c copy output.ts

or inline loop the current folder .ts files using :

ffmpeg -f concat -safe 0 -i <(for f in ./*.ts; do echo "file '$PWD/$f'"; done) -c copy output.ts

The -sage 0 above is not required if the paths are relative.

The -i mylist.txt is a file text that contains the list of input files to concatenate it should be with the following format :

# this is a comment

file '/path/to/file1'

file '/path/to/file2'

file '/path/to/file3'

Finally the output.ts will be the name of your final file you should specify the output type .ts or another format .mkv

Source 1 :

Source 2 :